RB iconIP iconMPE iconRBAS iconRouse icon
Mascus Logo所有類別
刊登！

Primo HD CAR 82X20 TA

不含增值稅價格

Images1
Primo HD CAR 82X20 TA 平板式/側卸式拖車
Favorite我的最愛
share分享
Save search儲存搜尋
列印

INFO

產品類別
平板式/側卸式拖車
品牌/ 型號
Primo HD CAR 82X20 TA
出廠年份
2023
機械所在位置（請填城市名，例如台北..等）
Lethbridge County, Alberta
國家
加拿大
Mascus產品ID碼
8F6C78C1

定價

幣別選擇

詳細資料

內部庫存號
#P231286
後輪胎尺寸
Radial 15″ Tires
附屬裝置
Torsion Sure Lube Axle r TIG Welded Frame Is Better Than MIG Welding Stainless Steel Hardware Radial 15″ Tires Aluminum Mag Wheels All Recessed L.E.D Lights Tubular A-Frame Tongue Ramps that turn into stone guards Aluminum Extruded Decking Standard PRIMO designed for the consumer 6 5000 lbs. in floor D-rings
其他資料
7 X 20 Tandem Axle CAR Hauler Our car haulers are specifically designed with the customer in mind. Our main frame is made with 2×5 inch tube with a thickness of ¼”, this makes our car hauler frame the strongest on the market rated at 6990lbs. Sticking true to our base we not only run our main framing from front to back, but we add 4 more 1×2 inch beams that span the whole length of the trailer. We then use 4-6 more 1×2 beams from side to side. We then go even further and add two more 2×4 inch tubes down each side of the trailer. All wiring is ran completely enclosed with no wire exposed. We use ultra-bright LED lights to ensure everyone on the road can see your trailer at night. We use 6005-A aluminum on this trailer. 6005-A is a great aluminum, it has the strength of 6061 but the flexibility of 6063. Almost every US based aluminum trailer manufacturer use 6061, this is a strong aluminum but is not flexible at all so when it fails it shatters. 6005-A offers the perfect balance between strength and flexibility. You might be wondering why all these companies use 6061. The answer is simple, availability and cost. 6005-A is an aluminum that is not only hard to source in the US but is also almost 30% more expensive. Fortunately, we have partners to provide us a steady stream of this premium aluminum. At Primo Trailer Manufacturing, we strive to be the best aluminum trailer manufacturer in the US. We promise to never cut corners to save a dime if it is at the expensive of cutting any quality. We use a 1.5mm thick custom extrusion for our flooring. This mold has 4 ribs giving each 8’ long piece a 2500lb payload capacity. We have drove Kubota and Yanmar excavators over these pieces with no problems occurring.顯示更多

Vantage Trailer Sales Inc

#5 90070 RR 211 T1J 5P1 Lethbridge County Alberta 加拿大
獲取電子郵件通知
顯示所有Vantage Trailer Sales Inc廣告
report ad檢舉可疑廣告