| 其他資料 | Features
Efficient To Get The Job Done: Super Boom® vertical lift design The C362 is optimized for lift-and-carry operations. The patented New Holland Super Boom® vertical lift linkage offers more height and reach, which allows operators to load material into the center of high-sided truck boxes or hoppers. This allows for visibility to the cutting edge of the loading bucket.
Durable And Practical: Heavy-duty construction The C362 is built with a heavy-duty steel rear door, steel rear hood, and NEW LED front work lights with sidelamps, for extra visibility during nighttime operation.
A Beast In Class: The power, strength and stability to lift more - 6,200-lb rated operating capacity @ 50% tipping load (12,400-lb tipping load) - 114-HP engine @ 2500 RPM - Long track base of 74.2 inches (17.7 inch wide tracks) - Ground pressure of 6.1 psi - Strong bucket tip and lift breakout forces of 12,907 and 12,084 lbs respectively with 78" heavy duty bucket
Comfort For Long Work Shifts: A smooth ride and improved track life The undercarriage design provides a smoother ride with 6 triple flange rollers and double flange idlers. Track life is extended by using steel-embedded tracks rolling on the rubber instead of the steel to provide a reduced noise experience. Plus, one of the widest cabs in the industry makes it easy to get in and out.
Engine
Manufacturer/model: FPT/ F5B FL413 D*C005
Bore/stroke, in (mm): 3.9 x 4.3 (99 x 110)
Displacement, in3 (L): 207 (3.4)
Fuel injection: HPCR Direct
Air intake: Turbocharged w/ waste gate and external cooled EGR
Horsepower per SAE J1349 Gross hp (kW): 114 (85) @ 2,500 rpm
Horsepower per SAE J1349 Net hp (kW): 114 (85) @ 2,500 rpm
Peak torque, lb-ft (Nm): 339 (460) @ 1,400 rpm
Power Train
Travel speed, low range, mph (km/h): 5.0 (8.0)
Travel speed, high range (optional), mph (km/h): 8.7 (14.0)
Dimensions
Bucket hinge pin, in (mm): 140.2 (3.56)
Top of ROPS, in (mm): 84.6 (2.15)
Bottom of level bucket, fully raised, in (mm): 133.3 (3386)
Overall length without attachment with coupler, in (mm): 129.5 (3.29)
Dump angle, degrees: 46.1
Dump reach (max height), in (mm): 17.2 (437)
Rollback, bucket on ground, degrees: 30
Rollback, bucket at full height, degrees: 84
Track on ground, in (mm): 74 (1.88)
Ground clearance (bottom of belly pan), in (mm): 12.6 (0.32)
Angle of departure, degrees: 37.7
Clearance circle without bucket, in (mm): 67.4 (1712)
Clearance circle rear, in (mm): 69.5 (1765)
Overall width, in (mm): 78.3 (1.99)
Ground pressure, PSI (with spec belt): 6.1
Hydraulic System
High Flow, gpm: 41.6
Optional Enhanced High Flow, gpm: 41.6
High Flow Relief Pressure, psi: 3,450
Optional Enhanced High Flow Relief Pressure, psi: 4,100 |