不含增值稅價格
793,660 TWD新台幣
269,000 NOK
的基本資料 產品類別 其他鑽鑿設備 品牌/ 型號 Nemek 300TSE 出廠年份 1999 機械所在位置(請填城市名,例如台北..等) Buskerud 國家 Mascus產品ID碼 11DB598E + 顯示更多細節 定價 幣別選擇 TWD新台幣 不含增值稅價格 793,660 TWD新台幣 (269,000 NOK )增值稅 不含應退增值稅VAT 含增值稅價格 - 詳細資料 內部庫存號 17110 其他資料 Please provide reference number upon request: 17110
Specifications:
- Engine: Deutz air-cooled
- Kw: 49
- Weight: 7500kg
- Hours: There is no hour meter on the machine, so it is uncertain.
- In 2021, a lot of hydraulic hoses were changed.
- Engine oil, filter, hyd. filter, diesel filter and air filter as well as oil on track gears and rotary gearbox have recently been changed.
- Feed length for 3m lining pipes
- Board up to 220mm
- Cavotec radio control
- Top winch 750kg
- Rear mounted winch
- Near stop cord on mast
- Telescopic magazine for drill pipes above the left belt (120m)
- Dynaset welding device
- Dynaset water pump
- Has been driven with a top hammer/Drifter by Tautech
- Went with clamping table instead of key table at Tautech (Possibly still available at Qmatec if it is of interest)
Description:
Light and clever rig that works as it should, even if it is getting a few years old. Very good technical condition.
This is one of the last 300 models built at Nemek
Strong mast on this, the same as was used on the 510TS.
Tautech rebuilt this machine from hydraulic levers to radio control, supplied by Cavotec.
This is a rig for drilling casings and rock holes with a DTH hammer.
It's an air-powered hammer, you have to have a large air compressor with you in addition to this.
This is for drilling water wells or light foundations of smaller dimensions. It does not come with either a compressor, drill hammers, drill strings or air hoses.
您可在Mascus臺灣尋找到「Nemek 300TSE其他鑽鑿設備」。「Nemek 300TSE」的價格為NT$ 793,660,1999年製造。此機械目前位於挪威Buskerud。您可在 Mascus.com.tw 找到「Nemek 300TSE」和其他更多型號的其他鑽鑿設備。 詳細資料 - 內部庫存號:17110